Specification
Model 40
 
1960 - 1974  early model
* Production period in Japan.
 The period of introduction for this generation model may vary by region.
 
» FJ40 canvas top
DIMENSIONS
Overall, length 3,840mm
Overall, width 1,665mm
Overall, height 1,950mm
Wheel bace 2,285mm
Tread, front 1,404mm
Tread, rear 1,350mm
Ground clearance 200mm
WEIGHT
Vehicle weight 1,480kg
Seating capacity 3 (7) Passengers
Payload 400kg
TIRE
Front 7.10-15-4ply
Rear 7.10-15-4ply
» FJ40 hard top
DIMENSIONS
Overall, length 3,840mm
Overall, width 1,665mm
Overall, height 1,950mm
Wheel bace 2,285mm
Tread, front 1,404mm
Tread, rear 1,350mm
WEIGHT
Vehicle weight 1,550kg
Seating capacity -3 (7) Passengers
Payload 400kg
TIRE
Front 7.10-15-4ply
Rear 7.10-15-4ply
» FJ43 canvas top
DIMENSIONS
Overall, length 4,215mm
Overall, width 1,665mm
Overall, height 1,960mm
Wheel bace 2,430mm
Tread, front 1,404mm
Tread, rear 1,350mm
Ground clearance 200mm
WEIGHT
Vehicle weight 1,590kg
Seating capacity 3 (9) Passengers
Payload 500kg
TIRE
Front 7.60-15-4ply
Rear 7.60-15-6ply
» FJ43 2 door wagon
DIMENSIONS
Overall, length 4,370mm
Overall, width 1,690mm
Overall, height 1,835mm
Wheelbase 2,430mm
Tread, front 1,404mm
Tread, rear 1,350mm
WEIGHT
Vehicle weight 1,795kg
Seating capacity 5 Passengers
Payload 400kg
TIRE
Front 7.60-15-4ply
Rear 7.60-15-4ply
» FJ45V 4 door wagon
DIMENSIONS
Overall, length 4,630mm
Overall, width 1,720mm
Overall, height 1,770mm
Wheelbase 2,650mm
Tread, front 1,404mm
Tread, rear 1,350mm
WEIGHT
Vehicle weight 1,850kg
Payload 600 (400) kg
Seating capacity 3 (6) Passengers
TIRE
Front 7.00-15-6ply
Rear 7.00-15-8ply
» FJ45P pickup truck
DIMENSIONS
Overall, length 4,535mm
Overall, width 1,665mm
Overall, height 1,835mm
Wheelbase 2,650mm
Tread, front 1,404mm
Tread, rear 1,350mm
WEIGHT
Vehicle weight -
Payload 1,000kg
Seating capacity 3 Passengers
TIRE
Front 7.00-15-6ply
Rear 7.00-15-8ply
 
» GENERAL DATA
PERFORMANCE
Maximum speed 135km/h
Grade ability 46 degree
Min. turning radius 5.3m
Gasoline Tank Capacity 70lt
ENGINE
Type Model F, gasoline engine, 4-cycle. Pushrod overhead valve in detachable head.
No. of cylinders 6
Bore and stroke 90.0 x 101.6mm
Displacement 3,878c.c.
Compression ratio 7.8
Maximum gross B.H.P. 115PS at 3,600 rpm
Maximum gross torque 30.0kg-m at 2,200 rpm
Engine service weight 282kg
LUBRICATION SYSTEM Pressure lubricating system. Oil cleaner with paper filter element. Oil pan capacity 5.9lt. 4-bearing forged crankshaft. Aluminum alloy piston. Deep skirt block webbed for extra rigidity. 2 compression and 2 oil rings.
COOLING SYSTEM Forced circulation, water cooled, centrifugal pump, spindle runs in sealed ball bearings which require no lubrication, circulation controled by thermostat. Capacity, 16.6lt.
ELECTRICAL SYSTEM 12-volt negative ground, output regulated by Current Voltage Control system. Double horns. Sealed type headlamps. Parking lamps and turn indicator lamps. Combined tail and stop lamps. Electrical type windshield wipers. Battery, 12 volt 55 amp. hour. Generator, 12 volt 216 watts.
FUEL SYSTEM Large dry type air cleaner with replaceable paper filter element. Down draft type carburetor. Exhaust heated vaporizing chamber with thermostatic control. Mechanical fuel pump driven off camshaft.
CLUTCH Single dry plate with rubber torsion dampers. Diameter 275mm.
TRANSMISSION 3 speed forward and 1 reverse with synchromesh second and top gears. Steering column shift. Ratios : first 2.757 ; second 1.691 ; top, 1.000 ; reverse 3.676.
Transfer case, 2 speed remote control
Ratios : high 1.00 ; low 2.31.
FRONT AXLES Full-floating, banjo-housing, hypoid drive. Heat-treated chrome molybdenum steel axle shafts. Tapered rollers differential bearings. Gear ratio 3.7.
REAR AXLES Semi-floating, banjo-housing, hypoid drive. Heat-treated chrome molybdenum steel axle shafts. Tapered rollers differential bearings. Gear ratio 3.7.
STEERING Worm and sector-roller type. Gear ratio 20.5-23.5.
FRAME Girder type, channel section.
SUSPENSION Long semi-elliptic spring type with single acting hydraulic tubular type shock absorbers. Stabilizer bar mounted across rear of vehicle.
BRAKE Hydraulic internal-expanding type acting on all wheels. Hand brake operates on propeller shaft by separate brake mechanism.
OPTIONAL ITEMS Pintle hook, trailer socket, front winch, rear P.T.O., wheel (hub) caps, fog lamps, locking gas tank cap, lock for tool trunk, oil bath type air cleaner, jerry can, auto radio, car heater, over size radiator fan, differential ger ratio (3.7 or 4.11), and conventional type transmission gear shift lever.
1960 - 1974  late model
* Production period in Japan.
 The period of introduction for this generation model may vary by region.
 
» FJ40 canvas top/vinyl top
DIMENSIONS
Overall, length 3,870mm
Overall, width 1,665mm
Overall, height 1,950mm
Wheelbase 2,285mm
Tread, front 1,404mm
Tread, rear 1,400mm
Ground clearance 200mm
Min. turning circle 10.6m
WEIGHT
Net vehicle weight 1,480kg
Gross vehicle weight 2,050kg
TIRE
Front 7.10-15-4ply
Rear 7.10-15-4ply
» FJ40 hard top
DIMENSIONS
Overall, length 3,870mm
Overall, width 1,665mm
Overall, height 1,930mm
Wheelbase 2,285mm
Tread, front 1,404mm
Tread, rear 1,400mm
Ground clearance 200mm
Min. turning circle 10.6m
WEIGHT
Net vehicle weight 1,575kg
Gross vehicle weight 2,050kg
TIRE
Front 7.10-15-4ply
Rear 7.10-15-4ply
» FJ43 canvas top
DIMENSIONS
Overall, length 4,230mm
Overall, width 1,665mm
Overall, height 1,970mm
Wheelbase 2,430mm
Tread, front 1,404mm
Tread, rear 1,400mm
Ground clearance 210mm
Min. turning circle 11.0m
WEIGHT
Net vehicle weight 1,590kg
Gross vehicle weight 2,300kg
TIRE
Front 7.60-15-4ply
Rear 7.60-15-6ply
» FJ45P-B pickup
DIMENSIONS
Overall, length 4,980mm
Overall, width 1,690mm
Overall, height 1,960mm
Wheelbase 2,950mm
Tread, front 1,404mm
Tread, rear 1,400mm
Ground clearance 230mm
Min. turning circle 13.2m
WEIGHT
Net vehicle weight 1,720kg
Gross vehicle weight 2,900kg
TIRE
Front 7.00-16-6ply
Rear 7.00-16-8ply
 
» GENERAL DATA
ENGINE Type - 6-cylinder in line ; Bore & stroke-90.0 x 101.6mm ; Piston displacement - 3,878c.c. ; Compression ratio - 7.5:1 ; Max. horsepower - 130PS @ 3,600 rpm. ; Max. torque - 29.0m-kg @ 2,000 r.p.m. ; Carburetor - Down draft, single barrel ; Fuel tank capacity - 70 litres, Station Wagon - 90 litres ; Cooling system - Forced circulation by centrifugal pump ; Lubrication system - Forced lubrication by gear pump ; Engine oil capacity - 8.5 litres ; Battery - 12 volts 50 amp. hr. ; Alternator - 12 volts 480 watts.
CLUTCH Type - Dry single plate with torsion rubbers ; Facing diameter - 275mm ; Facing area - 716 cm2 ;
GEARBOX Type - 3-speed, 2nd & 3rd gears synchromesh ; Gear ratio - First : 2.76, Second : 1.70, Third : 1.00, Reverse : 3.67.
TRANSFER Type - 2-speed, helical gear sliding type ; Gear ratio-high 1.00 ; low 2.31.
FRONT AXLES Type - Full-floating, hypoid gear drive ; Ratio - 3.70.
REAR AXLES Type - Semi-floating, hypoid gear drive ; Ratio - 3.70.
SUSPENSION Front - Semi-elliptic leaf springs and double-acting hydraulic shock absorbers.
Rear - Semi-elliptic leaf springs and doublea-cting hydraulic shock absorbers.
Torsion stabilizer on Models FJ43 and FJ45P-B only.
STEERING Type - Worm and sector-roller ; Gear ratio 21 to 1.
BRAKE Service brake - Hydraulic brake operating on aii wheels ; Drum diameter - 290mm ; Lining area - 1,180cm2 ; Parking brake - Mechanical brake operating on propeller shaft.
1974 - 1984
* Production period in Japan.
 The period of introduction for this generation model may vary by region.
 
» BJ40-KCJ(BJ40V-KC)
DIMENSIONS
Overall, length 3,915mm
Overall, width 1,665mm
Overall, height 1,960(1,940)mm
Wheelbase 2,285mm
Tread, front 1,415mm
Tread, rear 1,400mm
Ground clearance 210mm
Seating capacity 2 (4) Passengers
Turning radius 5.3m
WEIGHT
Net vehicle weight 1,630(1,710)kg
Gross vehicle weight 2,140(2,220)kg
Payload 400(0)kg
ENGINE
Type Model B, diesel engine, OHV
Cylinders in-line 4
Bore and stroke 95.0 x 105.0mm
Displacement 2,977cc
Compression ratio 21.0
Maximum gross power 85PS/3,600 r.p.m.
Maximum net torque 20.0kg-m/2,200 r.p.m.
Gasoline tank capacity 62 liters
TRANSMISSION 4 M/T
Gear ratio : 1st 4.925
: 2nd 2.643
: 3rd 1.519
: 4th 1.000
: reverse 4.925
TRANSFER
Gear ratio : high 1.000
Gear ratio : low 1.959
Axle ratio 4.111
SUSPENSION
Front semi-elliptic leaf spring
Rear semi-elliptic leaf spring
STEERING GEAR ball-and-nut
BRAKE
Front drum
Rear drum
TIRE 7.00-15
» BJ43-KCJ
DIMENSIONS
Overall, length 4,275mm
Overall, width 1,665mm
Overall, height 1,970mm
Wheelbase 2,430mm
Tread, front 1,415mm
Tread, rear 1,400mm
Ground clearance 210mm
Seating capacity 2 (6) Passengers
Turning radius 5.3m
WEIGHT
Net vehicle weight 1,775kg
Gross vehicle weight 2,385kg
Payload 500(0)kg
ENGINE
Type Model B, diesel engine, OHV
Cylinders in-line 4
Bore and stroke 95.0 x 105.0mm
Displacement 2,977cc
Compression ratio 21.0
Maximum gross power 85PS/3,600 r.p.m
Maximum net torque 20.0kg-m/2,200 r.p.m.
Gasoline tank capacity 62 liters
TRANSMISSION 4 M/T
Gear ratio : 1st 4.925
: 2nd 2.643
: 3rd 1.519
: 4th 1.000
: reverse 4.925
TRANSFER
Gear ratio : high 1.000
Gear ratio : low 1.959
Axle ratio 4.111
SUSPENSION
Front semi-elliptic leaf spring
Rear semi-elliptic leaf spring
STEERING GEAR ball-and-nut
BRAKE
Front drum
Rear drum
TIRE 7.00-15
» BJ41-KCY(BJ41V-KCY)
DIMENSIONS
Overall, length 3,915mm
Overall, width 1,665mm
Overall, height 1,960mm
Wheelbase 2,285mm
Tread, front 1,415mm
Tread, rear 1,400mm
Ground clearance 210mm
Seating capacity 2 (6/4) Passengers
Turning radius 5.3m
WEIGHT
Net vehicle weight 1,665(1,695)kg
Gross vehicle weight 2,065(2,095)kg
Payload 400(0)kg
ENGINE
Type Model 2B, diesel engine, OHV
Cylinders in-line 4
Bore and stroke 98.0 x 105.0mm
Displacement 3,168cc
Compression ratio 21.0
Maximum gross power 93PS/3,600 r.p.m.
Maximum net torque -22.0kg-m/2,200 r.p.m.
Gasoline tank capacity 85 liters
TRANSMISSION 4 M/T
Gear ratio : 1st 4.925
: 2nd 2.643
: 3rd 1.519
: 4th 1.000
: reverse 4.925
TRANSFER
Gear ratio : high 1.000
Gear ratio : low 1.959
Axle ratio 4.111
SUSPENSION
Front semi-elliptic leaf spring
Rear semi-elliptic leaf spring
STEERING GEAR ball-and-nut
BRAKE
Front drum
Rear drum
TIRE 7.00-15
» BJ44-KCY
DIMENSIONS
Overall, length 4,275mm
Overall, width 1,665mm
Overall, height 1,970mm
Wheelbase 2,430mm
Tread, front 1,415mm
Tread, rear 1,400mm
Ground clearance 210mm
Seating capacity 2 (8) Passengers
Turning radius 5.5m
WEIGHT
Net vehicle weight 1,775kg
Gross vehicle weight 2,275kg
Payload 500(0)kg
ENGINE
Type Model 2B, diesel engine, OHV
Cylinders in-line 4
Bore and stroke 98.0 x 105.0mm
Displacement 3,168cc
Compression ratio 21.0
Maximum gross power 93PS/3,600 r.p.m.
Maximum net torque 22.0kg-m/2,200 r.p.m.
Gasoline tank capacity 85 liters
TRANSMISSION 5(4) M/T
Gear ratio : 1st 4.313
: 2nd 2.330
: 3rd 1.436
: 4th 1.000
: 5th (0.838)
: reverse 4.220
TRANSFER
Gear ratio : high 1.000
Gear ratio : low 2.295
Axle ratio 4.875
SUSPENSION
Front semi-elliptic leaf spring
Rear semi-elliptic leaf spring
STEERING GEAR ball-and-nut
BRAKE
Front ventilated disc
Rear drum
TIRE 215SR15
» BJ42-KC(BJ42V-MCM)
DIMENSIONS
Overall, length 3,915mm
Overall, width 1,690mm
Overall, height 1,960(1,905)mm
Wheelbase 2,285mm
Tread, front 1,415(1,425)mm
Tread, rear 1,400(1,410)mm
Ground clearance 210(185)mm
Seating capacity 2 (6)/(2(4)) Passengers
Turning radius 5.3m
WEIGHT
Net vehicle weight 1,680(1,750)kg
Gross vehicle weight 2,190(2,225)kg
Payload 400(0)/250(0)kg
ENGINE
Type Model 3B, diesel engine, OHV
Cylinders in-line 4
Bore and stroke 102.0 x 105.0mm
Displacement 3,431cc
Compression ratio 20.0
Maximum gross power 98PS/3,500 r.p.m.
Maximum net torque 23.0kg-m/2,200 r.p.m.
Gasoline tank capacity 85 liters
TRANSMISSION 4(5) M/T
Gear ratio : 1st 4.925
: 2nd 2.643
: 3rd 1.519
: 4th 1.000
: 5th (0.845)
: reverse 4.925
TRANSFER
Gear ratio : high 1.000
Gear ratio : low 1.959
Axle ratio 4.111
SUSPENSION
Front semi-elliptic leaf spring
Rear semi-elliptic leaf spring
STEERING GEAR ball-and-nut
BRAKE
Front drum
Rear drum
TIRE 7.00-15(215SR15)
» BJ46-KC(BJ46V-MCM)
DIMENSIONS
Overall, length 4,275mm
Overall, width 1,690mm
Overall, height 1,955(1,910)mm
Wheelbase 2,430mm
Tread, front 1,415(1,425)mm
Tread, rear 1,400(1,410)mm
Ground clearance 210(185)mm
Seating capacity 2 (8)/(2(5)) Passengers
Turning radius 5.5m
WEIGHT
Net vehicle weight 1,770(1,870)kg
Gross vehicle weight 2,380(2,330)kg
Payload 500(0)/350(200)kg
ENGINE
Type Model 3B, diesel engine, OHV
Cylinders in-line 4
Bore and stroke 102.0 x 105.0mm
Displacement 3,431cc
Compression ratio 20.0
Maximum gross power 98PS/3,500 r.p.m.
Maximum net torque 23.0kg-m/2,200 r.p.m.
Gasoline tank capacity 85 liters
TRANSMISSION 4(5) M/T
Gear ratio : 1st 4.925
: 2nd 2.643
: 3rd 1.519
: 4th 1.000
: 5th (0.845)
: reverse 4.925
TRANSFER
Gear ratio : high 1.000
Gear ratio : low 1.959
Axle ratio 4.111
SUSPENSION
Front semi-elliptic leaf spring
Rear semi-elliptic leaf spring
STEERING GEAR ball-and-nut
BRAKE
Front drum
Rear drum
TIRE 7.00-15(215SR15)